26650 battery

Model:26650-3800mAh-3.2V
Standard Capacity:3800mAh 0.2C,( current value of 3800mA at 1C)
Minimum Capacity:3750mAh 0.2C
Standard Volta:3.2V
Alternating Internal Resis:≤25mΩ
Charge Conditions
Cut-off Voltage:3.65±0.05V
Cut-off Current:0.01C
constant-current charge to 3.65V at 0.5C, constant voltage charge to stop until
0.01C m A
Max. Charging Current:3.8A
Discharge Cut-off Voltage:2.5V
Standard Discharge Current:1.9A
Fast Discharge Current:3.8A This current is the maximum current recommended for the combination of cells, and the specific value should be determined according to the combination structure. The maximum operating current is set at a temperature not exceeding 60 ℃。
Max. Continuous Discharge Current:11.4A Only for single ce
Pulse Discharge Current:20A,5s
Cycle Characte:2000 times(100%DOD) 4000 times( 80%DOD)7000 times(50%DOD)
Working Tempera:Charge:0℃~55℃ Discharge:-20℃~60℃
Storage Temperature:-20℃~55℃ Short-term storage (< 3 months)
Cell Weight:Approx 87.5g

Lithium ion battery size 26650

 

lifepo4 lithium battery has a series of unique advantages such as high working voltage, high energy density, long cycle life, green environmental protection, and supports stepless expansion. After forming an energy storage system, it can be used for large-scale electric energy storage. Lithium iron phosphate Battery energy storage System consists of lithium iron phosphate Battery pack, Battery Management System (BMS), converter device (rectifier, inverter), central monitoring System, transformer, etc.

Moreover, it supports stepless expansion and is suitable for large-scale energy storage. It has a good application prospect in the fields of power generation safety and grid connection of renewable energy power stations, peak regulation of power grid, distributed power station, UPS power supply, emergency power system and so on.

Lithium-ion Cell 26650-3800mAh-3.2V Characteristics Curve:

Curve characteristics of lithium iron phosphate battery

Electrical Characteristics:

discharge capacity at normal temperature:After full charge, the experiment can be put on hold for 10 minutes; 0.2C discharge to 2.5V allows five repetitions. When the range of three consecutive experiments is less than 3% of the rated capacity, the experiment can be completed ahead of time and the maximum value of the test results can be obtained。

Discharge performance at different temperatures:After standard charging of normal batteries, it should be stored at least 12 hours in the constant temperature environment of – 20 ℃, – 10℃, 0℃, 10 ℃ and 25 ℃, respectively, and 5 hours of 60 ℃. Then discharge with 0.5C current to the corresponding termination voltage. When the ambient temperature is more than 15 ℃, the termination voltage is 2.5V, if less than 15 ℃, which is 2.0V。

 

 

Request an inquiry?